مفاجأة القرن الواحد والعشرون للكاون [الأرشيف]

Hany Nabil

11-09-2004, 10:06 PM

واليكم ترجمة كلمات واجهة البرنامج مع الشرح بالأنجليزية لوظائف كل مفتاح

ARCHIVO = File

1- Abrir keys = To open keys
2- Guardar keys = To keep keys
3- Guardar keys como… = To keep keys like
4- Extraer desde firmware = To extract from firmware
Parchear firmware = To patch firmware- 5

Editar Keys = To publish Keys -6
A?adir Keys = To add Keys -7
8- Borrar Keys = To erase Keys
9- A?adir Proveedor = To add Supplier
10-Borrar Proveedor = To erase Supplier

مقدمة :

I have developed east publisher of keys of firmwares EMU for dekos Kaon, like a continuation to the works of investigation that we are making in the forum of playful investigation. This work began by desencriptar and decompressing firmware, after which the doors were opened to us to be able to modify it. We already can make some cochairs like changing the image of bottom of the radio and soon we will be able to translate to the Spanish firmwares that does not bring it. Now with this program we will be able to modify keys of the suppliers before flashear deko with new firmware. I must notice that we are beginning this yet and still we do not know as firmware behaves, for that reason these programs more than as consolidated tools it is necessary to describe them like experimental, and surely many options do not work well in the first versions, but without a doubt they are going to allow to us to advance in the study of firmware that is which it is. I have tried to make the publisher with an interface very similar to the wonderful Downloader, that all those that you have programmed some safe Fun that you know, so that is more intuitive their handling. Also I have made it compatible in the sense that txt with downloader is able to read generated files *, for example, lowering keys updated of Internet. The program has been testeado in Windows XP, but its good operation in another platform is not guaranteed. I do not guarantee either that firmware works once patched, among other reasons because I have not been able to test nor single when now not having deco to my reach. It is important to emphasize that the changes become in keys by defect, not in which they change with the remote control, reason why so that the change has effect is necessary to once press the yellow key within the hidden menu. Also it is possible to be recovered of factory to recover keys by defect. This promouth that keys that had been updated with the remote control loses

1- Abrir keys = To open keys
This option allows to recover files of keys previously kept, or generated by the Downloader. For example, we can have our customized file txt of keys, updated and to put it to nobody firmware to it before flashear deco. The format of the files of keys is of flat text, and they even can be published with any text editor, although he is not recommendable, because the order of the data within the file is critical for a correct interpretation on the part of the program. We can extract keys that has firmware of course anyone (that is EMU) and keep them in a file txt

2- Guardar keys = To keep keys
This order is comfortable to use it when keys which they are published have been loaded with the commando To open keys, because directly the file without asking for a name nuevoy sobrewrites allows to be keeping the progresses from faster form.

3- Guardar keys como… = To keep keys like
When we want to keep the modifications from keys in another file. This option automatically we entered when we have extracted them of firmware. In firmware only there are data of identification of the supplier and the key, but not of the date of the same one nor of the name of the supplier, for that reason these are not important at the time of publishing. They only are useful like added information. So that the program knows to correlate a number of supplier with a name I have created, (with the collaboration of Kakafutix), a file from which the Radiac Keys extracts this called information Proveedores.txt and that it can be published or be updated with complete freedom with a text editor, whenever it keeps the same structure.

4- Extraer desde firmware = To extract from firmware
When we want to modify keys of firmware, dividing of which already has, will be necessary to use this order. That can which the program does not find keys in firmware, can be because this one is not EMU. Therefore we will be able to also use it like detector of firmwares EMU. I recommend to use whenever this option can because the keys are contained in a piece very delimited of firmware and if we changed too many, as txt with downloader can be the case of lowering of Internet a new file *, can that the resulting block is very different from which it has firmware. In addition by the tests that I have done with some firmwares are some?keys strange, that possibly he needs the EMU, as they are the case of irdeto and nagra for suppliers FF 20 and FF 21. When they are extracted keys from firmware, the just previous bytes define the size of the block of keys compressed and decompressed, for that reason if we put more keys than those than already it has, Radiac Keys will warn to us so that we erase some key that is not going away to use, since if the block compressed resulting after the modifications surpasses in size to the original one, it could cause that deco correctly did not work with that firmware.

5- Parchear firmware = To patch firmware
Because it is clear that this is the purpose of the program. Taken care of here because once patched firmware it is not possible to be returned to its original state, for that reason he is advisable always to make backup of the same one before patching it. Before just to apply the patch detailed information appears a window giving us of the sizes of the blocks of keys in firmware from which they were extracted, of firmware that is going away to patch and as it is left firmware patched. Here there will be a warning of which the compressed block to patch is greater than the space than has destined to it firmware to patch, if this situation occurs. I do not know if there is firmwares in which the block of keys is without compressing, for that reason the program prevee also this situation patching with new keys without compressing

6- Editar Keys = To publish Keys
These modifications takes place in the memory of the PC, therefore nothing neither in firmware nor in the file of keys is modified until it is not executed to patch firmware or to keep keys. Also it can serve to change the date of edition of a key, although any value in the own key does not change. The modifications are made in the box of keys and they are possible to be introduced with or without spaces, in addition it is possible to be used to copy (Ctrl+c) and to beat (Ctrl+v) to take or to bring the selection to the paper holder and is more comfortable the update. They only allow the entradad of characters with sense, is to say of the 0-9, high frequency and space. If it is tried to introduce another character will emit a BEEP and that pulsation will be cancelled. When it is pressed to?editar keys? the changes made in the key are transferred to the list of keys. In the suppliers of Nagravisión an adjustment between the valid numbers of identification for Kaon and the valid ones for other systems is made. For example supplier 4801 of Kaon is the 4901 of the SX6in1 files, in these cases the program presents/displays the supplier as 4901 and manipulates it at the time of extracting and patching firmware so that it stays as 4801. In any case he is advisable to both have 4901 suppliers and Â01 (that are transformed into firmware in 4801 and 4901) with same keys.

7- A?adir Keys = To add Keys
to add to a key in target or with values determined to the supplier and selected system. When it is executed this order adds a new registry. Therefore it is necessary to have well-taken care of of not exceeding the space that has firmware that we are going to patch destined to the keys. The program warns if there are more registries of keys from which we left, because it supposes that firmware that we are going to patch is the same one from which we have extracted the keys. For example if nothing else to extract keys we executed this order will leave this message. Like the size that it has the block of keys is limited, this option must be used when really it is necessary, is to say not to increase the number of keys of suppliers to which access is not had. The program allows to introduce the number of a key which or it exists, with which keys with the same number will be two, reason why will be necessary to eliminate some, or to publish it.

8- Borrar Keys = To erase Keys
Realiza the process in opposition to the previous commando. If flock the last key of a supplier, will eliminate of automatic form that supplier. For that reason if a supplier only has a key is better to publish it, or if it is wanted to replace first to add the new one and soon to erase the old one. If we want to introduce keys new he would be advisable first to erase keys of suppliers that are not going away to visualize. They are not possible to be erased all keys of a system (at least always there will be 1)

9- A?adir Proveedor = To add Supplier
Makes the same function that to add key, unless in the new registry, the number of identification of the supplier is new. It is necessary to have the same precaution that in the case of adding key. The supplier introduced in the picture will be added YOU GO: and It names:, with a key of number 00 with all the values to 00, that there will be to publish properly. He would be advisable that the name of the supplier with its number introduced by means of a text editor in the file?Nombre Proveedores.txt? that it accompanies the program to complete it. It is necessary to consider that when the file of keys is closed the name of introduced supplier will be lost and in the next session a name for the number of new supplier will be busacará previously in the indicated file.

10- Borrar Proveedor = To erase Supplier
to erase key, but flock all the keys of a same supplier. If only we have left a supplier, she will not erase, is to say does not allow the existence of a system without any supplier. All the suppliers of a system cannot be erased (at least always there will be 1).

وهذا ترجمة من الأسبانية إلى الانجليزية من واقع Help File الخاص بالبرنامج ...
وسوف يتم محاولة ترجمة واجهة البرنامج الى العربية او الانجليزية ان أمكن .